CAN FD to Ethernet Converter

CAN FD to Ethernet Converter(CANFD-NET-100T/200T)

1.1 Product Overview

CAN-FD-NET-100T/200T high performance CAN FD to Ethernet converter integrates one CAN (FD) interface or two-way CAN FD interfaces and Ethernet interface as well as TCP / IP protocol stack. Users can easily realize the interconnection and interworking between CAN bus network and Ethernet network, and further expand the scope of CAN FD network.

CAN-FD-NET-100T / 200T CAN FD to Ethernet adapter, each CAN channel is integrated with complete electrical isolation protection and surge protection, with strong anti-interference ability. It is a CAN FD over Ethernet converter with stable performance and reliable communication.

The conversion efficiency of CAN-FD-NET-100T / 200T adapter reaches 5000 frames / S (CAN FD extended frames at 5Mbps), which is suitable for all applications of CAN (FD) from low speed to high speed.

1.2 Product Features:

• 32-bit 400m processor with embedded real-time operating system.
• The flow rate is 5000 frames / S (CAN FD extended frames at 5Mbps).
• Using real-time operating system and adaptive flow control algorithm, it is suitable for the control system with strict real-time requirements.
• CAN (FD) - bus interface adopts electromagnetic isolation with isolation voltage of 2.5KV.
• 10m / 100M Ethernet interface (RJ45), 2KV electromagnetic isolation;
• Configuration software can be used to set the working parameters of CAN (FD) and Ethernet.
• CAN 2.0A and CAN 2.0B protocols.
• It supports 1-2 CAN (FD) controllers, and each channel can be controlled separately.
• Shielded or unshielded twisted pair.
• The baud rate of CAN (FD) controller is between 5 Kbps and 5 Mbps.
• At most 110 nodes can be connected to a single bus, and the longest communication distance is 10 km.
• 9-40V DC wide voltage input with surge, over-current and reverse connection protection.
• Working temperature: - 40 ℃ - + 85 ℃.
• Storage temperature: - 55 ℃ - + 85 ℃.
• Physical size: (length) 105mm * (width) 84mm * (height) 28mm. 
• Can Bus port number: 1 or 2

1.3 Typical applications

CAN-bus network diagnosis and test

Auto electronic applications

Electric power communication network

Industrial control devices

High-speed and large data communications

Ordering Information: