CAN to CAN FD Converter

CAN to CAN FD Converter

The CAN-FD-BRIDGE-200T Series CAN to CAN FD conveter utilizes automatic bidirectional switching requiring no control signal. The product can be used as CAN to CAN FD converter or CAN FD repeater.

As CAN (FD) intelligent bridge, CAN-FD-BRIDGE-200T CAN to CAN FD converter supports the default conversion processing of CAN to CAN FD, CAN to CAN FD, CAN to CAN, CAN FD to CAN FD, etc. In addition, it also provides special conversion processing such as merging (several can messages forming a CAN FD message), splitting (a CAN FD message is split into several can messages), and frame mapping. Users can freely set the rules of CAN (FD) message forwarding mapping, packet Grouping and unpacking to meet their own application requirements.

Feature & Benefits:

32-bit 400m high-speed processor, embedded with real-time operating system and adaptive flow control algorithm, is suitable for the system with strict real-time requirements.

The port has queue buffering to ensure the frame integrity of all applications from low speed to high speed.

The port uses rotary dial switch to set the baud rate of CAN FD data domain and arbitration domain. For most applications, customers do not need to use configuration software.

 The port has sending, receiving and status indication separately, which is convenient for industrial field debugging.The configuration software and configuration method of CAN (FD) to serial port, CAN (FD) bridge, CAN (FD) switch, CAN (FD) to optical (point-to-point), CAN (FD) to optical (bus type), CAN (FD) and optical hybrid switch are completely unified. Customers can switch between these products seamlessly.

The Series CAN FD bridge can be widely used, such as Industrial Controls, Intelligent Transportation Systems (ITS), Industrial Networking,

Supervisory Control and Data (SCADA) and so on.

Other Specs:

• Linking two CAN nets with data buffering
• Different bit rates on the CAN nets possible
• 11-bit ID and 29-bit ID bridge
• Internal microcontroller MB90F543
• High-Speed CAN interface acc. to ISO 11898-2, 5 Mbit/s
• Electrical isolation by optocouplers and DC/DC-converters
• Configuration of the CAN-FD-Bridge module is easily done by means of a PC/terminal
• Isolation 3000Vsm
• Lightning/Surge Protection 1~2 lightning strikes
• ESD Protection 15KV

CAN FD:

• Connector Type Terminal
• Data Rate: 5Kbps~5Mbps
• Extended Distance 10Km
• Operating Temperature -40 ~ 70C / -40 ~ +158F
• Operating Humidity 0 ~ 95% non-condensing
• Mean Time Between Failure (MTBF) > 70, 000hrs
• Power Supply Input Voltage 9~40V DC
• Power Supply Output Voltage 5V DC
• Dimensions (W × D× W) 156mm× 108mm× 33.6mm