DeviceNet Protocol Repeater
The DeviceNet Repeater is a kind of protocol bridge repeater,which is used to prolong the distance of DeviceNet communication,increase the nodes and improve the isolation ability.The repeater is based on industrial grade and it has low power consumption and easy mount way.When the DeviceNet repeater connects 2 DeviceNet networks,the 2 networks work at the same rate,the system has auto-sensing function.The DeviceNet repeater uses 5 PIN block terminal interface,which is in compliance with DeviceNet standard.
Technical Specification:
Bus Topology: Point to point link
Flow control function: Yes
DeviceNet Bus Interface: 5 PIN block terminal,in compliance with European standard
Transmission Type: Prototocl, DeviceNet frame transmission
Physical standard:DeviceNet,CAN2.0A、CAN2.0B
DeviceNet Baud Rate:125Kbps、250Kbps、500Kbps
500Kbps、800Kbps、1000Kbps;Auto-sensing
Buffering: 128 frames buffer
Power Input:DC9V-DC30V, < 2W ;
LED Status:Data,Power,Work status,Alarm
Dry Contact Alarm Output:Relay Interface,24V@1A,This email address is being protected from spambots. You need JavaScript enabled to view it.
Housing:D35mm DIN Rail,40x 110 x 74(mm)
Enclosure:Metal:IP40
Vibration:In compliance with IEC68-2-6
Weight:600g
Work Temperature:-25℃ ~ +75℃;Humidity:95% No condensing;
Storage:-45℃ ~ +85℃
Standard:CANOpen Standard
Electromagnetic:EN61000-4-2(8KV ESD)
EN61000-4-3,ENV50204(anti-electromagnetic 10V/m at 10KHz-1GHz)
EN61000-4-4(2KV Fast pulse group)
EN61000-4-5(Common mode 1KV,Differential mode 2KV SPD)
EN55022(Radiation class B)