CAN Distributed Remote I/O Module with 5-ch Relay Output(Form A)
CAN Bus Data Acquisition Module(5xRelay Output)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6014T |
CAN-6015T |
|
|
Relay Output |
|||
|
Output Channels |
5 |
5 |
|
|
Output Type |
Power Relay, Form A(SPST) |
Power Relay, 3-ch Form A(SPST), 2-ch Form C(SPDT) |
|
|
Output Voltage |
250VAC /30VDC |
||
|
Max Load Current |
3.0A/channel |
||
|
Operate Time |
6ms |
||
|
Release Time |
3ms |
||
|
Electrical Life |
At 30 VDC / 3 A Typical 1 x 105 operations (Operating frequency 20 operations/minute) At 250 VAC/ 3 A Typical 1 x 105operations (Operating frequency 20 operations/minute) |
||
|
Mechanical Life |
2x107 |
||
|
Isolation |
3750Vrms |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |