Other Fieldbus Fiber Optic Converters

GE GENIUS Fiber Optic Converter

GE GENIUS Bus Fiber Optic Converter

Description:

The GE Genius Fiber Optic Converter is designed for use in optical Genius bus field bus networks. It permits conversions of electrical Genius bus interfaces into optical Genius bus interfaces and vice versa. The repeaters can be integrated in existing Genius bus field bus networks. Genius Fiber Converter can also be used to configure a complete Genius bus field bus network with point to point, line or ring topology.The mechanical structure comprises a compact, rigid metal housing which can either be mounted on a hat rail or on any flat base. Apart from setting the data rate, no other adjustments have to be made during set-up.

*Notes: This transmission distance of network are also affected by the Genius network protocol on Genius network total length constraint

By profiting from the familiar advantages of optical transmission technology, the modules can be integrated into existing GENIUS field bus networks. A complete GENIUS field bus network with modules in pint to point, line, star or ring topology, and an arbitrary combination of these, can also be built up.

The redundant ring is also supported to the GE GENIUS Fiber Optic Converter, thereby increasing the fail-safety of the field bus network.

The device is powered by 24V DC voltage. A redundant feed increases operational safety.

The optical fibers are connected using ST connectors.

6 multicolored LED indicate the current operating status

Transmission rate of the GENIUS Fiber Optic Converter

The Genius fiber optic converter supports the data rates 153.6 kBaud (standard and extended),

76.8 kBaud, and 38.4 kBaud.

Technical Specs:

Voltage/power supply  
Operating voltage 12 V to 30 V DC, typ. 24 V,
Current consumption typ. 120 mA@24V
Signaling contact Max .switch DC24V@2A or This email address is being protected from spambots. You need JavaScript enabled to view it.
Signal transmission  
Transmission rate 153.6Kbps STD, 153.6Kbps EXT
76.8Kbps,38.4Kbps
Setting transmission rate Switch setting
Bit error rate < 10-9
Signal processing time 80ns/station
Cascade modules 32
Electrical port  
Input/output signal Genius
Isolate voltage >= 1500VDC
PIN assignment 5-PIN terminal block
Length of Genius cable 153.6Kbps STD:  <300M
153.6Kbps EXT:  <300M
76.8Kbps:   <600M
38.4Kbps:   < 1200M
Connection capability Max.10 terminal data devices
Terminator Must be attached outside to connector
Electrical isolation  
– Shielding in/Shielding out Yes
– Data lines/Housing Yes
Optical ports  
Wavelength 1310 nm
optical power  
– in glass fiber 9/125um -9dBm  –  -18 dBm
– in glass fiber G 62.5/125 -13 dBm –  -20 dBm
Receiver sensitivity -34dBm
Transmission distance  
–with glass fiber 9/125um 0 – 20,000 m (0.3 dB/km)
– with glass fiber G 62,5/125 0 – 3,000 m  (2.0 dB/km)
Connector ST
Electromagnetic compatibility (EMC)  
Limit class B (EN 55022) EN 61000-4-2
EN 61000-4-3
Burst:  

On power supply lines
shielded RS 485 bus lines

±2 kV (EN 61000-4-4)
Surge  
Power lines,Shielded cable lines

±1 kV symmetrical,±2 kV asymmetrical (EN 61000-4-5)

Others  
Ambient temperature -25 °C to +75 °C
Storage temperature 40 °C to +85 °C
Relative humidity <95 %, non-condensing
Protection class IP 40
Dimensions (W x H x D) 62 x 132 x 120 mm
Weight approx. 600 g

Ordering Information:

Model Number

Description

Fiber No.

Fiber Mode

Fiber Connector

HFD-FO-GE-P1M

Point to Point Link,Single Fiber(BI-DI), 2km

1

Multi Mode

ST/SC/FC

HFD-FO-GE-P2M

Point to Point Link,Dual Fiber, 2km

2

Multi Mode

ST/SC/FC

HFD-FO-GE-P1S

Point to Point Link,Single Fiber(BI-DI), 20km

1

Single Mode

ST/SC/FC

HFD-FO-GE-P2S

Point to Point Link,Dual Fiber, 20km

2

Single Mode

ST/SC/FC

 

 

 

 

 

HFD-FO-GE-M2M

Multi Point Bus Link,Dual Fiber(BI-DI), 2km

2

Multi Mode

ST/SC/FC

HFD-FO-GE-M4M

Multi Point Bus Link,4 Fiber, 2km

4

Multi Mode

ST/SC/FC

HFD-FO-GE-M2S

Multi Point Bus Link,Dual Fiber(BI-DI), 20km

2

Single Mode

ST/SC/FC

HFD-FO-GE-M4S

Multi Point Bus Link,4 Fiber, 20km

4

Single Mode

ST/SC/FC

 

 

 

 

 

HFD-FO-GE-R2M

Redundant Ring Link,Dual Fiber(BI-DI), 2km

2

Multi Mode

ST/SC/FC

HFD-FO-GE-R4M

Redundant Ring Link,4 Fiber, 2km

4

Multi Mode

ST/SC/FC

HFD-FO-GE-R2S

Redundant Ring,Dual Fiber(BI-DI), 20km

2

Single Mode

ST/SC/FC

HFD-FO-GE-R4S

Redundant Ring,4 Fiber, 20km

4

Single Mode

ST/SC/FC

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input